瑟瑟狠狠五月-瑟瑟久草-瑟瑟瑟热热热91-瑟瑟偷拍自-瑟瑟五月天91-瑟瑟五月天小说-瑟瑟亚洲一区-瑟瑟影院导航-瑟瑟影院日韩一区三区-瑟瑟综合网-瑟综合网-山东乱子伦视频国产

Troubleshooting and maintenance of high pressure cleaning machine

2018-08-14 10:22:37 qxp

Troubleshooting of high pressure cleaning machine


 

It is inevitable that some working faults will occur during the long-term operation of the high-pressure cleaning machine. When the high-pressure cleaning machine fails, the operator should find out the reasons carefully and solve the problems in time according to different fault phenomena. Below we mainly introduce some common faults and troubleshooting of high pressure cleaning machine.

 

1. If there is abnormal screams during operation of the high-pressure cleaning machine, most of the reasons are caused by the lack of oil in the motor bearing. In this case, we only need to inject ordinary butter into the filling hole of the motor to solve the problem. We are in the high pressure cleaning machine regular maintenance when the replacement.

 

Second, high pressure cleaner after the start, when pressure is unstable or sometimes without pressure, here are the reasons why most of the high pressure water pump or suction caused by the air inlet pipe road, then need to check the water pressure, enough water filter blockage, if it is found that water filter blockage, filter to remove water to clean.

 

3. In the process of operation, the high-pressure cleaning machine has certain working pressure but cannot be adjusted to the rated pressure of the equipment, or the pressure only stays within a certain range but cannot rise. In this case, the first thing to be determined is whether the aperture of the high-pressure nozzle is matched. If the pressure is still not going up after replacing the high-pressure nozzle, it is necessary to check whether the pressure regulating valve is properly adjusted. If the failure is still in the case of both cases, it means that the sealing component (water seal) in the pump is damaged or the piston is damaged. In this case, it is necessary to contact the manufacturer to assist in maintenance.

 

4. The pressure of the high-pressure cleaning machine decreases after a certain period of normal operation. In this case, the first thing to check is whether the high-pressure nozzle is seriously worn. The high pressure nozzle of the equipment is difficult to guarantee. Next, the sealing components inside the pressure regulating valve and the pump need to be checked separately.

 

5. after starting the equipment, there is no water injection from the high-pressure pump, which requires the manufacturer's maintenance staff to check. Most of the reason is that the inlet flow valve cannot be opened. If the problem remains in this case, it is that the high and low pressure waterways are in series, that is, the water of the low pressure pipeline cannot enter the high pressure pipeline, thus the high pressure pump cannot work. The occurrence of this phenomenon needs to contact the manufacturer to help repair and solve.

 

6. There is abnormal noise inside the high-pressure pump after the start of the high-pressure cleaning machine. The first judgment is that the high-pressure pump sucks in air, and the second check is whether the flow valve spring is damaged or the crankcase bearing is damaged. This situation requires contacting a vendor to assist with maintenance.

 

7. high pressure cleaner in regular maintenance, through the window, if it is found that the crankcase oil becomes cloudy or milky, indicate that the oil seal is lax or within high pressure water pump has been damaged, if not timely replacement, the impurities in the water will seriously damage the service life of the crankshaft and connecting rod, resulting in high pressure water pump completely damaged.

 

8.Oil dripping from the bottom of the high-pressure pump indicates that the oil seal in the pump is damaged and needs to be replaced in time. When the high pressure pump is running, the crankshaft and connecting rod are doing the back and forth motion continuously. At this time, oil is needed to lubricate and cool the pump, so the high pressure pump cannot be short of lubricating oil.

 

9. When the high-pressure cleaning machine is in operation, the high-pressure pipe is violently shaken, which indicates that the valve is out of order and needs to be re-pressurized.

 

10. when the high-pressure cleaning machine is in normal operation, the pressure of the pressure regulating valve is normal, and the water jet of the high-pressure water gun does not discharge water or the water jet of the high-pressure nozzle is irregular and dispersed, which indicates that the high-pressure nozzle is blocked with foreign matter and the high-pressure nozzle needs to be removed for cleaning.



主站蜘蛛池模板: 丁香五月天小说 | 激情五月天色婷婷网 | 爱豆传媒免费播放 | 欧美韩日日 | 美欧浮力影院成人A片 | 三级片黄色AV网站 | 五月婷婷色色 | 国产主播福利在线 | 成年人网站三级片 | 日韩女同毛片区二区 | 尤物视频在线吃瓜 | 91社区在线播放 | 九一福利视频网址 | 国产吃瓜在线观看 | 麻豆久久久网站 | 中国一区二区黄片儿 | 日本一二三黄色网址 | 在线资源福利 | 色播欧美 | 日本日韩欧美影 | 东京热电影网站 | 另类日韩欧美 | 亚洲综合五月天 | 不卡视频在线 | 欧美福利二区 | 国产极品永久在线播放 | 午夜福利入口在线 | 丁香五月无码视频 | 黄色AV在| 青青国产| 午夜激情在线 | 黄色网址最新视频 | 牛牛热福利导航 | 无码经典中文一区二区 | 欧美成人精品欧美一级 | 日韩无码中文字幕 | 性欧美另类AD | 国产乱伦免费观看 | 国产精品日本色色 | 日韩欧美综合在线 | 国产精品成人激情 |